On-off valves
On-off valves
Products
On-off valves
ABV Energy is specialized in the design and manufacturing of specialty valves and actuators for Oil, Gas, Power Generation and Geothermal processes.
cnt4
Series NSC
Series NSC
Abv axial check valve series nsc
Abv axial check valve series NSC
cnt5
Sizes
4” – 24”
Pressure classes
ASME 900 – 2500
Materials of construction
Low pressure carbon steel
Stainless steel
Duplex and Superduplex
Alloy steel
Low pressure drop
Maintenance free
Tight shut-off
No slam
Typical application
Low pressure drop
Pump protection
Severe services
Connections
Flanged
Compact Flange Norsok
Characteristics
No slam check valve
nsc.jpg
Series DBB
Series DBB
Modular Double Block and Bleed
cnt5
Sizes
1/2" - 2"
Pressure classes
ASME 150 - 4500
API 2000 – 15000
Materials of construction
Carbon Steel
Low Temperature Carbon Steel
Stainless and Duplex Stainless Steel
Exotic Alloys
Overlays
Alloy 625
Tungsten Carbide
Stainless Steel
Chromium Carbide
Stellite
ENP
Configuration
Ball – needle – ball or Ball – Ball - Ball
Face to face
According to API 6D
In compliance with
API 6D
API 6A
ASME B16.34
P.E.D.
Options
Soft or metal Seated
Injection Quill
Check Valve
Series-DBB.jpg
Series BTD
Series BTD
Modular Double Block and Bleed
ABV Series BTD Side Entry and Series BTX Top Entry
Side Entry and Top Entry Bolted Bonnet
Double Block and Bleed Valves with double fixed balls hinged on supports, and
floating metal or soft seats. Valve configuration : Ball - Needle - Ball or Ball - Ball -
Ball.
Pressure Range: from ASME Class 150 to ASME Class 2500, and from API Class 3000
to API Class 15000.
Temperature range: from –46°C to 450°C
Side Entry Forged Steel Valves.
On request, Top-Entry design (BTX series).
Low pressure loss through the valve.
Low actuation torque
“CE” marking in compliance with PED Directive 97/23/EC.
Full bore or reduced bore.
Different kinds of end connections (RF/RTJ Flanges, Butt Weld, Clamp Connection,
Socket Welding).
Vent connections : NPT-F, RTJ, Compact Flanges.
Wide availability of materials depending on the specifications (carbon steel, stainless
steel or Duplex steel for service in corrosive environments, Chrome-Molybdenum
alloy steel for high temperature service, etc.).
Materials with anti-corrosion properties according to NACE MR 0175
On request, seat pocket area overlay, seal area overlay, or completely cladded on
wetted surfaces (welded overlays in Inconel 625, Stainless Steel 316, etc., or
Electroless Nickel Plating).
Suitable for manual actuation (wrench/gear) or motorized actuation ( hydraulic,
pneumatic, gas-over-oil or electric actuator).
cnt5
Sizes
1/2" - 60"
Pressure classes
ASME 150 - 4500
API 2000 – 15000
Materials of construction
Carbon Steel
Low Temperature Carbon Steel
Stainless and Duplex Stainless Steel
Exotic Alloys
Overlays
Alloy 625
Tungsten Carbide
Stainless Steel
Chromium Carbide
Stellite
ENP
Configuration
ball – needle – ball or Ball – Ball - Ball
Face to face
According to API 6D
In compliance with
API 6D
API 6A
ASME B16.34
P.E.D.
Options
Soft or metale Seated
Single or Double Piston Effect Seats
Overlay on Sealing Surfaces Only
Fully Internal Cladding
Series-BTD.jpg
Series BTU
Series BTU
Ball Valve Trunnion mounted Welded Body
cnt5
Sizes
1/2" - 60"
Pressure classes
ASME 150 - 4500
API 2000 – 15000
Materials of construction
Carbon Steel
Low Temperature Carbon Steel
Overlays
Alloy 625
Tungsten Carbide
Stainless Steel
Chromium Carbide
Stellite
ENP
In compliance with
API 6D
API 6A
ASME B16.34
P.E.D.
Options
Soft or metal Seated
Single or Double Piston Effect Seats
Overlay on Sealing Surfaces Only
Fully Internal Cladding
Nace MR 01-75
Stem extension for buried installation
Series-BTU.jpg
Series BTE
Series BTE
Ball Valve Top-Entry
Top Entry Trunnion Mounted Ball Valves, with ball hinged on supports and floating
metal or soft seats.
Pressure Range: from ASME Class 150 to ASME Class 4500, and from API Class 2000
to API Class 15000.
Temperature range: from –46°C to 260°C.
On request. possibility to use in cryogenic conditions (temperatures from
–50°C to – 146°C).
Forged Steel Valves.
Low pressure loss through the valve.
Low actuation torque
Easy maintenance in line on vertical pipes.
“CE” marking in compliance with PED Directive 97/23/EC.
Full bore or Reduced bore.
Different kinds of end connections (RF/RTJ Flanges, Butt Weld, Clamp Connection,
Socket Welding).
Wide availability of materials depending on the specifications (carbon steel, stainless
steel or duplex steel for service in corrosive environments, Chrome-Molybdenum
alloy steel for high temperature service, etc.).
Materials with anti-corrosion properties according to NACE MR 0175.
On request, seat pocket area overlay, seal area overlay, or completely cladded on
wetted surfaces (welded overlays in Inconel 625, Stainless Steel 316, etc., or
Electroless Nickel Plating)
Suitable for manual actuation (wrench/gear) or motorized actuation (hydraulic,
pneumatic, gas-over-oil or electric actuator).
cnt5
Sizes
1/2" - 56"
Pressure classes
ASME 150 - 4500
API 2000 – 15000
Materials of construction
Carbon Steel
Low Temperature Carbon Steel
Stainless and Duplex Stainless Steel
Exotic Alloys
Overlays
Alloy 625
Tungsten Carbide
Stainless Steel
Chromium Carbide
Stellite
ENP
In compliance with
API 6D
API 6A
ASME B16.34
P.E.D.
Options
Soft or metale Seated
Single or Double Piston Effect Seats
Overlay on Sealing Surfaces Only
Fully Internal Cladding
Nace MR 01-75
BTE.jpg
Series-BTE.jpg
BTE Saldata.jpg
Series BT2-BT3
Series BT2-BT3
Ball Valve Trunnion mounted Bolted Body
Side entry Trunnion Mounted Ball valves
Trunnion Mounted ball valves, with ball hinged on supports and floating metal or soft
seats.
Pressure range: from ASME Class 150 to ASME class 4500, and from API Class 2000
to API Class 15000.
Temperature range: from -46°C to 450°C.
On request possibility to use in cryogenic conditions (temperature up to -196 °C).
Two Pieces Forged Steel Valves
Low pressure loss through the valve.
Low actuation torque
"CE" marking in compliance with PED Directive 97/23/EC.
Full bore or reduced bore.
Different kinds of end connections (RF/RTJ Flanges, Butt Weld, Clamp Connection,
Socket Welding).
Wide availability of materials depending on the specifications (carbon steel, stainless
steel or duplex steel for service in corrosive enviroments, Chrome-Molybdenum alloy
steel for high temperature service etc.).
Materials with anti-corrosion properties according to NACE MR 0175.
On request, seat pocket area overlay, seal area overlay, or completely cladded on
wetted surfaces (welded overlays in Inconel 625, Stainless Steel 316, etc., or
Electroless Nickel Plating).
Suitable for manual actuation (wrench/gear) or motorized actuation (hydraulic,
pneumatic, gas-over-oil or electric actuator).
cnt5
Sizes
1/2" - 60"
Pressure classes
ASME 150 - 4500
API 2000 – 15000
Materials of construction
Carbon Steel
Low Temperature Carbon Steel
Stainless and Duplex Stainless Steel
Exotic Alloys
Overlays
Alloy 625
Tungsten Carbide
Stainless Steel
Chromium Carbide
Stellite
ENP
In compliance with
API 6D
API 6A
ASME B16.34
P.E.D.
Options
Soft or metal Seated
Single or Double Piston Effect Seats
Overlay on Sealing Surfaces Only
Fully Internal Cladding
Nace MR 01-75
BT3.jpg
BT3_Actuators.jpg
Series-BT2-BT3.jpg
Series BF2
Series BF2
Side entry Floating Ball valves
Pressure range: from ASME Class 150 to ASME Class 2500
Temperature range: from -29 °C to 450 °C.
Steel Valves.
Low pressure loss through the valve.
Low actuation torque.
“CE” marking in compliance with PED Directive 97/23/EC.
Full bore or Reduced bore.
Different kinds of end connections (RF/RTJ Flanges, Butt Weld, Socket weld, Clamp Connection).
Wide availability of materials depending on the specifications (carbon steel, stainless steel or Duplex Steel for service in corrosive environments, chrome-molybdenum alloy steel for high temperature service, etc.).
Materials with anti-corrosion properties according to NACE MR 0175.
Suitable for manual actuation (wrench/gear) or motorized actuation
(hydraulic, pneumatic, gas-over-oil or electric actuator).
cnt5
Sizes
1/2” – 8”
Pressure Classes
ASME 150 – 4500
API 2000 – 15000
Materials of Construction
Carbon Steel
Low Temperature Carbon Steel
Stainless and Duplex Stainless Steel
Exotic Alloys
In compliance
API 6D
ASME B16.34
PED
Options
Soft or Metal Seated
Overlay on Sealing Surface only
Fully Internal Cladding
Nace MR 01-75
FotoBF2.jpg
